Programming various cellfones including: bellsouth, motorola, and nokia.
8f292f273b59377ede19928117000ab1<html>
<title> pimp issue one </title>
</head>
<body bgcolor="black" text="white" link="#63C6DE" vlink="skyblue" alink=
"skyblue">
<br>
<pre>
<font color=white size=2>
_ _ _______ _____ ___ ___ ____ _
/___/ /___/ / / /__) /_
_ __/ _/ \ _/__/ _/__) _/____ _ _ _ _ _ _ _
/ I N D U S T R I E S
/
1995
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Probe Industries Magazine Philes #1 aka "PIMP" #1 |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
This phile has 5 manuals which were taken directly from Cellular One, on how to
program a few different Cellular Fones.
Following is the list of Fones that this phile shows you how to program.
<a href="#sec1">1.Motorola Flip Phones + Pocketphones</a> (same guide)
<a href="#sec2">2.Motorola Bag Phones</a>
<a href="#sec3">3.Other Motorola Phones</a> < a miscellanous guide >
<a href="#sec4">4.Bellsouth Transportable (bag)Phones</a>
<a href="#sec5">5.Bellsouth Portable Cellular Telephones</a>
---------------------------
Basic Info
---------------------------
Manufacturers Decimal Hexadecimal
------------- ------- -----------
OKI 129 81
Motorola 130 82
Motorola 195 C3
Mitsubishi 134 86
NEC 135 87
Panasonic 136 88
Novatel 142 8E
AT&T 158 9E
Uniden 172 AC
Here is some programming information you will need.
System I.D. ............................................... 000001
Preferred System Mark...................................... 1
Initial Paging System...................................... 0333
Access Overload Class .... 0 + last four digits of cellular number.
Group ID Mark ............................................. 00
<a name=sec1></a>
+------------------------------------------------------------------+
| PHILE # 1 : Programming the Motorola Flip and PocketPhone |
+------------------------------------------------------------------+
first off, charge the fone. <duh>
Then:
Press Power ON
Press Function Key (FCN) 0000000000000 (13 ZEROS) Recall Key (RCL)
<Note: you will NOT see any zero's in the display>
Step 1:
Display shows 0 1
Press *
Display shows 0 0 0 0 0 ; Enter your Carrier System ID (USE 00001)
Step 2:
Press *
Display shows 0 2
Press *
Display shows 1 1 1; Enter Customer Area Code _ _ _
Step 3:
Press *
Display shows 0 3
Press *
Display shows 1 1 1 0 1 1 1; Enter Customer Phone Number
Step 4:
Press *
Display shows 0 4
Press *
Display shows 14; DO NOT CHANGE.
Step 5:
Press *
Display shows 0 5
Press *
Display shows 0 0; Enter Carrier Access Overload Class __
0 + Last Digit of Phone Number
Step 6:
Press *
Display shows 0 6
Press *
Display shows 0 0; Enter Carrier Group ID _ _ ( USE 0 0 )
Step 7:
Press *
Display shows 0 7
Press *
Display shows 0 0 0 0 0 0; DO NOT CHANGE.
Step 8:
Press *
Display shows 0 8
Press *
Display shows 1 2 3; Do not change or change to desired random number.
This will be the lock pin code.
Step 9:
Press *
Display shows 0 9
Press *
Display shows 0 3 3 3 or 0 3 3 4; Enter Carrier Paging Channel
(Use 0 3 3 3)
Step 10:
Press *
Display shows 1 0
Press *
Display shows 0 1 1 1 0 0; DO NOT CHANGE.
Step 11:
Press *
Display shows 1 1
Press *
Display shows 1 1 1 0 0; DO NOT CHANGE.
Note: if mistake is made, press CLEAR (CLR) and re-enter any data or turn power
off to begin again. After verifying all data by pressing * going thru
steps 1-11, type send (SND) when you reach step 1 again.
DO NOT PRESS SND UNTIL ALL DATA HAS BEEN VERIFIED.
Motorola Phones can ONLY be programmed 3 times to insure SECURITY <hah> and
theft prevention.
<a name=sec2></a>
+-------------------------------------------------------+
| PHILE # 2 : Programming the Motorola Bagphones |
+-------------------------------------------------------+
Charge the fone, then press Power ON
Press CONTROL key (CTL) 0000000000000 (13 Zeros)
Press *
<Note: you will not see the zeros in the display>
Step 1:
Display shows 0 1
Press *
Display shows 0 0 0 0 0 ; Enter your Carrier System ID (USE 00001)
Step 2:
Press *
Display shows 0 2
Press *
Display shows 1 1 1; Enter Customer Area Code _ _ _
Step 3:
Press *
Display shows 0 3
Press *
Display shows 1 1 1 0 1 1 1; Enter Customer Phone Number
Step 4:
Press *
Display shows 0 4
Press *
Display shows 1 2; DO NOT CHANGE.
Step 5:
Press *
Display shows 0 5
Press *
Display shows 0 0; Enter Carrier Access Overload Class __
0 + Last Digit of Mobile Phone Number
Step 6:
Press *
Display shows 0 6
Press *
Display shows 0 0; Enter Carrier Group ID _ _ ( USE 0 0 )
Step 7:
Press *
Display shows 0 7
Press *
Display shows 0 0 0 0 0 0; DO NOT CHANGE.
Step 8:
Press *
Display shows 0 8
Press *
Display shows 1 2 3; Do not change or change to last three digits of
Customer's Phone Number.
Step 9:
Press *
Display shows 0 9
Press *
Display shows 0 3 3 3 or 0 3 3 4; Enter Carrier Paging Channel
(Use 0 3 3 3)
Step 10:
Press *
Display shows 1 0
Press *
Display shows 0 1 1 1 0 0; DO NOT CHANGE.
Step 11:
Press *
Display shows 1 1
Press *
Display shows 1 1 0; DO NOT CHANGE.
Note: if mistake is made, press CLEAR (CLR) and re-enter any data or turn power
off to begin again. After verifying all data by pressing * going thru
steps 1-11, type send (SND) when you reach step 1 again.
DO NOT PRESS SND UNTIL ALL DATA HAS BEEN VERIFIED.
Motorola Phones can only be programmed 3 times.
<a name=sec3></a>
+-------------------------------------------------------+
| PHILE # 3 : Programming Other Motorola Phones |
| (the "if all else fails try this phile" phile) |
+-------------------------------------------------------+
Press Power ON
Press Function Key (FCN) 000000000000 (12 ZEROS) Recall Key (RCL)
<Note: you will NOT see any zero's in the display>
Step 1:
Display shows 0 1
Press *
Display shows 0 0 0 0 0 ; Enter your Carrier System ID (USE 00001)
Step 2:
Press *
Display shows 0 2
Press *
Display shows 1 1 1; Enter Customer Area Code _ _ _
Step 3:
Press *
Display shows 0 3
Press *
Display shows 1 1 1 0 1 1 1; Enter Customer Phone Number
Step 4:
Press *
Display shows 0 4
Press *
Display shows 14; DO NOT CHANGE.
Step 5:
Press *
Display shows 0 5
Press *
Display shows 0 0; Enter Carrier Access Overload Class __
0 + Last Digit of Mobile Phone Number
Step 6:
Press *
Display shows 0 6
Press *
Display shows 0 0; Enter Carrier Group ID _ _ ( USE 0 0 )
Step 7:
Press *
Display shows 0 7
Press *
Display shows 0 0 0 0 0 0; DO NOT CHANGE.
Step 8:
Press *
Display shows 0 8
Press *
Display shows 1 2 3; Do not change or change to desired random number.
This will be the lock pin code.
Step 9:
Press *
Display shows 0 9
Press *
Display shows 0 3 3 3 or 0 3 3 4; Enter Carrier Paging Channel
(Use 0 3 3 3)
Step 10:
Press *
Display shows 1 0
Press *
Display shows 0 1 1 1 0 0; DO NOT CHANGE.
Step 11:
Press *
Display shows 1 1
Press *
Display shows 1 0 0; DO NOT CHANGE.
Note: if mistake is made, press CLEAR (CLR) and re-enter any data or turn power
off to begin again. After verifying all data by pressing * going thru
steps 1-11, type send (SND) when you reach step 1 again.
DO NOT PRESS SND UNTIL ALL DATA HAS BEEN VERIFIED.
Motorola Phone can only be programmed 3 times.
<a name=sec4></a>
+---------------------------------------------------------------+
| PHILE # 4 : Programming Bellsouth Transportable Phones |
+---------------------------------------------------------------+
- Press ON/OFF key to power up the phone.
- If Handset Displays WHICH NAM? skip next 4 steps.
- Press CLR 3 times in rapid succession.
- Press # 000000 ## 953739 # STO 99 STO STO
- Press ON/OFF to power down the phone.
- Press ON/OFF to power up the phone and it will now say WHICH NAM?
- Enter number 1-8 (USE 1) to correspond with the NAM you wish to
program, followed by STO.
- The display will read AREA ID, Enter the system ID
(example, 00025 - NY Metro or 0022 - NY Nynex) (5 digits) (USE 00001)
- Press * key, the display will read No. 666 888 6666, enter the ten
digit telephone number.
- Press * key, the display will read O/LOAD CLASS, enter your Overload
Class (2 digits) (USE 0 + Last digit of the Phone NUMBER)
- Press * key, the display will read GRP ID, enter your Group ID Mark
(2 digits) (USE 00)
- Press * key, the display will read EXp ?, enter your Extended
Addr Bit (1 or 0) (USE 1)
- Press * key, the display will read IPCH ?, enter Initial Paging
Channel, 333 for non-wireline system "A" or 334 for wireline
system "B". ( USE 333 )
- Press * key, the display will read SYSTEM ID, store the 3 letter
system ID. For example, to store "NYC" press 6 key two times,
display will show N. Press # to step to next letter and repeat by
pressing 9 key three times to get Y. Press # to step to the next
letter. Press 2 key three times to get C. Press # key to enter the
last letter. (if you cant figure this one out.. think it over.. )
- Press * key, the display will read SAVE NAM ?, Enter SEND to save
NAME, END to discard the change.
- To exit the NAM edit press the END key, this will terminate the edit
and power down the phone or repeat process for additional NAM's.
<a name=sec5></a>
+-------------------------------------------------------+
| PHILE # 5 : Programming Bellsouth Portable Phones |
+-------------------------------------------------------+
Charge it up.
Press ON/OFF
Enter # 000000 (6 zero's) # # 953739 #
Press M twice
Turn off: Press ON/OFF
Turn on: Press ON/OFF
Step 1:
Display shows "No of NAMS 1"
Press F
Step 2:
Display shows "Which NAM?"
Enter 1
Press F
Step 3:
Display shows "Default?"
(A or B appears)
If desired System appears Press F
To change to desired system press * then press F
(USE A)
Step 4:
Display shows "SID"
Enter Five digit System ID _____ (USE 00001)
Press F
Step 5:
Display shows "MIN2"
Enter the three digit Area Code ___
Press F
Step 6:
Display shows "MTS"
Press F
Step 7:
Display shows "MIN 1"
Enter Seven digit customer phone number ___-____
Press F
Step 8:
Display shows "NUMBER"
Press F
Step 9:
Display shows "ACCOLC"
Press F
Last digit of customer's phone number will be displayed.
Step 10:
Display shows "EX 1"
Press F
Step 11:
Display shows "AREA"
Enter 1 and Press M three times
Press F
Step 12:
Display shows "INTL 011"
Enter 011 ONLY if incorrect or missing
Press F
Step 13:
Display shows "EMERG 911"
Enter 911 ONLY if incorrect or missing
Press F
Step 14:
Display shows "OPER 0"
Enter 0 (Zero) ONLY if incorrect or missing
Press F
Step 15:
Display shows "Which NAM?"
Press *
Press F
Turn Off: Press ON/OFF
Turn On: Press ON/OFF
NOTE:
At any point in programming, if the information displayed is correct, it does
not have to be reentered, merely press F to continue.
+--------------------------------------------------------------------+
Below I have listed some credit bureau phone numbers you may contact VOICE for
any questions if say, you have to put down a $500 deposit when you buy a phone.
They will tell you why.
TRW 1-800-682-7654
TU (Trans Union) 1-312-408-1400
CB (Equifax) 1-800-685-1111
ALSO: while doing some scanning I *bumped* into 4 of equifax's modem lines..
must supply a group i.d. to even put in for a credit report.. you will NOT see
a CONNECT of any sort. just hit return after 15 seconds.
CB, Equifax Modem Lines
1-800-685-1101
1-800-685-1102
1-800-685-1103
1-800-685-1104
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+
This Phile Brought to You Courtesy of
fRiNgE, Probe Industries 1995
Call these H/P BBSes:
Apocalypse 2000 +1-847-831-0484 H/P/PuNK!
Poisoned Pen +1-847-966-2095 H/P
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+_+
</pre>
<a href=index.shtml>GO BACK...</a><br>
</body>
</html>
© 2012 Packet Storm. All rights reserved.
%7Cutmcsr%3D(direct)%7Cutmcmd%3D(none)){kind=small}
Follow us on Twitter
Follow us on Facebook
Subscribe to an RSS Feed
Comments
No comments yet, be the first!